Plasterboard walls how can i get a coat hook to stay on? - hook on plasterboard
Hello boys
I have a new house made of plaster Boo Hoo!
nothing on the walls for a long
I tryed acquisition of suitable raw plugs
tried without nails
tries, more screws, etc.
I think in the final
I will not be maintained only for long
What is the best thing to do ?.... by the only woman to have a heart to at least try!
Saturday, February 13, 2010
Hook On Plasterboard Plasterboard Walls How Can I Get A Coat Hook To Stay On?
10 comments:
Annexes to the gypsum board (metal)
Dead easy, you go to a hardware store to purchase the items above (usually in a bag) to a hole in the plaster board drill, the screws with a screwdriver. The result must be a hole (holes maybe) get the backing layer, otherwise keep in the pot and appears again and do it for you, and hooks, and the only problem with the search for asparagus (which all others are recommending is that if you do not want your hook, but Im sure that he would rather try to find a stud, even if they are made of wood,
Plasterboard to the timber and fastened against the wall where you want to go the hook, where a wooden is.but differance that go through the pounding of wood is not
Try out the kind of self-adhesive hook available at all hardware stores.
You have to find on the wall where the blocks of wood, noyhing as long as the drywall is not yet open structurally. Just walk along the wall until you hear its use. The bolts are made of wood frame is usually a distance of 600 mm with members of the cross in the middle, these screws and nails, which have no problem (although I suggest crews).
Good luck
Try to go screw, but can not even be installed without tearing the wall be removed.
Plasterboard has nails to hold it (all 16 "). Find a stud and attach the hook to one of them.
The surprise dri-wall/plasterboard fixing plasterboard worked.The not commit to a frame made of wooden slats behind plasterboard.Maybe if I could direct one of the wooden supports that could be found in the screw. It is an instrument of power to find wood, pipes, cables, etc. But if Your'e going to be used only once, which could perhaps ask you to guess his one.Failing, where they are and with many holes left the plaque, which will need to fill after.Good Chance
Hollow screws.
Or do you find the bolt.
Loads of "miraculous accessories in the DIY sheds. It should be good enough for a wardrobe. Like the previous answer, I always try to find the bodies. One trick that no one else has mentioned and that is very important when new is for you - use a hose / student / finder wire under tension. cables and pipes are often passed through the walls and of course I do not want to be electrocuted in his rack. He came, so they have now) (United Kingdom repressive legislation , which does not allow me, which has links to hundreds of cable channels, including whether to change a light aircraft used in a kitchen or bathroom. She was the wife of a politician who has been electrocuted, and made the cowboy electrician and not the hardware that is bolted into a rack full of metal in a direct line. Do not useSearch pipe, hence my insistence on this deal. Most browsers pipe has a wooden form, and if you do not play and hear, even though it is a good way. Candidates line is in your local accent, B & Q DIY store is the prefernce available. Good luck.
Try to switch to screws.
Post a Comment